P-135Ev CFA, SECANT AND DISPLACEMENT PILING RIG


P135


Llamada piling machine model P-135 Evolution, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 26,5 m. depth, with diameters between Ø400mm and Ø1.200mm.

1. Chasis Llamada
• Llamada hydraulically variable gauge tracks chassis : 2.980 mm to 4.320mm
• Track length : 5.350 mm
• Track shoes width : 800 mm
• Ground pressure : 1,74 kg/cm2
• Translation speed : 1,53 km/h.
• Working area : 245º

2. Transport dimensions
• Wide : 2.980 mm
• Long : 18.560 mm
• High : 3.520 mm
• Transport Weight : 60.000 kg (without counterweight): 75.000 kg (with counterweight)

3. Telescopic counterweight.
• Travel : 1.320 mm
• Detachable weight : 15.000 kg

4. Hydraulic group
- Motor VOLVO TAD1375 405kw. TIER IV FINAL
- Motor Deutz TCD 2015 V8, 400 kW (544 CV) TIER III

4.1. Main pumps
  4.1a. Close circuit (rotary table)

  4.1b. Open circuit

  4.1c. Regeneration pump


5. Winches
  5.1.- Main winch
   • First layer output : 26 Tm (x 4 = 104 Tm)
   • Max. speed : 30 mt/min.(30/4 = 7,5mt/min)
  5.2. Auxiliary winch
   • First layer output : 6,8 Tm.
   • Max. speed : 50 mt/min.
  5.3. Automatic CROWD winch
   • First layer output : 10 Tm (with two falls 15 x 2 = 30Tm).

6. Rigid mast
• Equipped with jib and sheaves.
• Frontal, lateral and back inclination
• Mast top height : 30,40 m.
• Pile top depth : CFA 26,5 m.

7. Cabin equipment
• The seat is ergonomic, comfortable & adjustable,with excellent visibility to 360º.
• Interior light.
• Controls: load sensing type servo control hydraulic system and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to UNE-EN ISO 3449 Standard.
• Machine securities according to CE EN 16228 Standard.

8. Rotary head
Llamada type P135 Evolution rotary head with a 5” inner tube for concrete flow (Diameter Ø125mm).

Hydraulic motor:
• 4 x POCLAIN dual displacement motor.
• Gear and torque selection, automatic or manual.
• Travel end.
• Torque KNm 339
• RPM de 0 a 25




*The manufacturer reserves the right to modify the technical characteristics of its products.