P 140 | CM Llamada

P-140TT CFA PILING RIG
< Back to Machines

See detail drawings and images by clicking on the thumbnails

Llamada piling machine model P-140TT, for the execution of continuous flight auger piles (CFA) or displacement piles, of maximum 28m depth and diameters between Ø400mm and Ø1000mm.

1. Chasis Llamada
• Llamada hydraulically variable gauge tracks chassis : 2.980 mm to 4.315 mm
• Track length : 5.350 mm
• Track shoes width : 800 mm
• Ground pressure : 0,80 kg/cm2
• Translation Speedy : 1,3 Km/h.
• Working area : 360º

2. Transport dimensions
• Width : 2.980 mm
• Length : 15.620 mm
• Hight : 3.375 mm
• Transport weight : 60.000 kg.

3. Telescopique counterweight.
• Travel : 1.100 mm
• Total weight : 9.300 kg

4. Hydraulic group
- Engine VOLVO TAD1373-VE, 345 kW (469 CV) a 1900 rpm.TIER IV FINAL
- Engine CATERPILLAR C13 328KW (440CV) TIER III

4.1. Main pumps
4.1a. Closed circuit (Rotary table)
   • Flow : 420 l/min. a 2.000 rpm
   • Working pressure : 350 bar
   • Maximum pressure : 420 bar
4.1b. Open circuit
   • Flow : 420 l/min. a 2.000 rpm
   • Working pressure : 350 bar
   • Maximum pressure : 420 bar
4.1c. Regeneration pump
   • Pump : several manufacturers
   • Flow : 90 l/min.

5. Winches
5.1. Main winch
   • First layer output : 13 Tm (x 4 = 52 Tm)
   • Maximum speed : 52 m/min.(52/4 =13 m/min)
5.2. Secondary winch
   • First layer output : 5,9 Tm
   • Maximum speed : 50 m/min
5.3. Automatic Crowd winch (pull down)
   • First layer output : 6 Tm
   • Maximum speed : 14 m/min

6. Telescopic mast
• Equipped with jib and sheaves.
• Frontal, side and back inclination
• Open mast top height : 31.810 0 m
• Closed mast top height : 24.270 mm
• Maximum depth : CFA 28 m

7. Cabin equipment
• Extensive cabin equipped with ergonomic seat
• Very comfortable & adjustable
• Excellent 360º visibility.
• Interior light
• Controls: hydraulic system with load sensing servo control type and proportional control
• Emergency stops, inside and outside
• FOPS cabin protection according to UNE-EN ISO 3449 Standard.
• Machine according to CE EN 16628.

8. Llamada rotary head
Llamada type P-140TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Hydraulic motor:
• 4 engines dual displacement motor.
• Speed and torque selection, automatic or manual.
• Travel end.
• Torque KNm 20,7
• RPM de 0 a 22,5

DOWNLOAD PDf*

PLAN P140TT.pdf

*The manufacturer reserves the right to modify the technical characteristics of its products.

P-140TT CFA PILING RIG < Back to Machines

P-140TT CFA PILING RIG
< Back to Machines