P-150TT CFA PILING RIG

P150-TT

Llamada piling machine model P-150TT, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 30 meter depth, and diameters between Ø400mm and Ø1.200mm.

1. Chassis Llamada
• Llamada hydraulically variable gauge tracks chassis : 3.245 mm a 4.750 mm.
• Track length : 5.500 mm
• Track shoes width : 800 mm
• Ground pressure : 0,90 kg/cm2
• Translation speed : 1,30 km/h.
• Working area : 262º

2. Transport dimensions
• Wide : 3.245 mm
• Long : 17.070 mm
• High : 3.750 mm
• Transport weight : 70.000 kg. (without counterweight): 80.000 kg. (with counterweight)

3. Telescopic counterweight.
• Stroke : 1.500 mm
• Total weight : 12.000 kg
• Detachable weight : 11.500 kg

4. Hydraulic group
Motor CATERPILLAR C18, 571 kW (765 CV) a 2100 rpm.

4.1. Main pumps
  4.1a. Close circuit (rotary table)
   • Flow : 270 l/min. at 2.000 rpm.
   • Working pressure : 350 bar
   • Max. pressure : 420 bar
  4.1b. Open circuit
   • Flow : 420 l/min. at 2.000 rpm.
   • Working pressure : 350 bar
   • Max. pressure : 420 bar
  4.1c. Regeneration pump
   • Flow : 90 l/min.
   • Working pressure : 40 bar

5.- Winches
  5.1.- Main winch
   • First layer output : 25 Tm (x 5 falls = 125 Tm)
   • Max. speed : 30 m/min (30/4 = 7,5 m/min)
  5.2.- Secondary winch
   • First layer output : 7,9 Tm
   • Max. speed : 39 m/min
  5.3.- Automatic Crowd winch
   • First layer output : 10 Tm (x 2 falls = 20 Tm).

6.- Telescopic mast
• Equipped with jib and sheaves.
• Frontal, side and back inclination
• Open mast top height : 33,76m.
• Closed mast top height : 26,28m.
• Pile top depth : CFA 30m.

7.- Cabin equipment
• Extensive cabin equipped with an ergonomic seat.
• Very comfortable & adjustable.
• Excellent 360º visibility.
• Inside light.
• Controls: hydraulic system with load sensing servo control type and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to: UNE-EN ISO 3449 Standard.
• Machine according to CE EN 791 Standard.

8. Llamada Rotary head
Llamada P-150TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Hydraulic motor:
• 4 engines dual displacement motor.
• Speed and torque selection, automatic or manual.
• Travel end.
• Torque KNm 261 (version STD)
• Torque KNm 333 (version HD)
• RPM de 0 a 21,5


 

*The manufacturer reserves the right to modify the technical characteristics of its products.