P-240TT CFA PILING RIG

P240-TT

Llamada piling machine model P-240TT, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 41 meter depth, and diameters between Ø 400 mm and Ø 1.200 mm.

1. Chassis Llamada
• Llamada hydraulically variable gauge tracks chassis : 3.490 mm a 5.090 mm.
• Track length : 6.780 mm
• Track shoes width : 800 mm
• Ground pressure working : 1,35 kg/cm2 - 0.94 kg/cm2
• Translation speed : 1,30 km/h.
• Working area : 252º

2. Transport dimensions
• Wide : 3.490 mm
• Long : 20.985 mm
• High : 3.490 mm
• Transport weight : 85.000 kg. (without counterweight)

3. Telescopic counterweight
• Travel : 1.500 mm
• Total weight : 22.000 kg
• Detachable weight : 19.250 kg

4. Hydraulic group
Motor CATERPILLAR C18, 571 kW (765 CV) a 2100 rpm.

4.1. Main pumps
   4.1a. Close circuit (rotary table)
    • Flow : 270 l/min. at 2.000 rpm.
    • Working pressure : 350 bar
    • Max. pressure : 420 bar
   4.1b. Open circuit
    • Flow : 420 l/min. at 2.000 rpm.
    • Working pressure : 350 bar
    • Max. pressure : 420 bar
   4.1c. Regeneration pump
    • Flow : 90 l/min.
    • Working pressure : 40 bar

5.- Whinches
   5.1.- Main winch
    • First layer output : 32,5 Tm (x 4 falls = 130 Tm)
    • Max. speed : 30 m/min (30/4 = 7,5 m/min)
   5.2.- Secondary winch
    • First layer output : 8 Tm
    • Max. speed : 39 m/min
   5.3.- Automatic Crowd winch
    • First layer output : 10 Tm (x 2 falls = 20 Tm).
    • Rope diameter : Ø 18mm.

6.- Telescopic mast
• Equipped with jib and sheaves.
• Frontal inclination : 2º
• Side inclination : 2º+2º
• Back inclination : 15º
• Open mast top height : 45,45m.
• Closed mast top height : 35,45m.
• Pile top depth:: CFA 30m. (Without mast sections): CFA 41m. (With mast section)

7.- Cabin equipment
• Extensive cabin equipped with an ergonomic seat.
• Very comfortable & adjustable.
• Excellent 360º visibility.
• Inside light.
• Controls: hydraulic system with load sensing servo control type and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to: UNE-EN ISO 3449 Standard.
• Machine according to CE EN 791 Standard.

8. Llamada rotary head
Llamada P-150TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Hydraulic motor:
• 4 engines dual displacement motor.
• Speed and torque selection, automatic or manual.(5 gear)
• Travel end.
• TORQUE KNm 339
• RPM de 0 a 21,5


*The manufacturer reserves the right to modify the technical characteristics of its products.