P-160TT CFA PILING RIG



LLAMADA piling machine model P-160TT, for the execution of continuous flight auger piles (CFA), or displacement piles, of maximum 35 meters depth for diameters between Ø400 mm and Ø1.000 mm., and maximum 33 meters depth for diameters between Ø400 mm and Ø1.200 mm.

1. Chassis Llamada
• Llamada hydraulically variable gauge tracks chassis : 3.500 mm a 5.050 mm.
• Track length : 5.500 mm
• Track shoes width : 800 mm
• Ground pressure : 0,91 kg/cm2
• Translation speed : 1,30 km/h.
• Working area : 262º

2. Transport dimensions
• Wide : 3.500 mm
• Long : 18.490 mm
• High : 3.740 mm
• Transport weight : 70.700 kg. (without counterweight): 85.000 kg. (with counterweight)

3. Telescopic counterweight.
• Stroke : 1.500 mm
• Total weight : 16.500 kg
• Detachable weight : 14.300 kg

4. Hydraulic group
- Engine VOLVO TAD 1671 450KW . TIER IV FINAL
- Engine CATERPILLAR C18, 571 kW (765 CV) a 2100 rpm.

4.1. Main pumps
  4.1a. Close circuit (rotary table)
   • Flow : 270 l/min. at 2.000 rpm.
   • Working pressure : 350 bar
   • Max. pressure : 420 bar
  4.1b. Open circuit
   • Flow : 420 l/min. at 2.000 rpm.
   • Working pressure : 350 bar
   • Max. pressure : 420 bar
  4.1c. Regeneration pump
   • Flow : 90 l/min.
   • Working pressure : 40 bar

5.- Winches
  5.1.- Main winch
   • First layer output : 25 Tm (x 5 falls = 125 Tm)
   • Max. speed : 30 m/min (30/4 = 7,5 m/min)
  5.2.- Secondary winch
   • First layer output : 7,9 Tm
   • Max. speed : 39 m/min
  5.3.- Automatic Crowd winch
   • First layer output : 15 Tm (x 2 falls = 30 Tm).

6.- Telescopic mast
• Equipped with jib and sheaves.
• Frontal, side and back inclination
• Open mast top height : 39050m.
• Closed mast top height : 31550m.
• Pile top depth :  CFA 35m. (From Ø400 to Ø1000)
                           CFA 33m. (From Ø400 to Ø1200)

7.- Cabin equipment
• Extensive cabin equipped with an ergonomic seat.
• Very comfortable & adjustable.
• Excellent 360º visibility.
• Inside light.
• Controls: hydraulic system with load sensing servo control type and proportional control.
• Emergency stops, inside and outside.
• FOPS cabin protection according to: UNE-EN ISO 3449 Standard.
• Machine according to CE EN 16628.

8. Llamada Rotary head
Llamada P-160TT rotary head with a 5” inner tube for concrete flow (Ø125 mm).

Hydraulic motor:
• 4 engines dual displacement motor.
• Speed and torque selection, automatic or manual.
• Travel end.
• Torque KNm 261 (version STD)
• Torque KNm 333 (version HD)
• RPM de 0 a 21,5


 


*The manufacturer reserves the right to modify the technical characteristics of its products.